When you fix floss between the teeth, gently raise and lower the floss along the sides of the teeth from top to near the gum. Passing a floss threader under or over dental appliances like bridges, permanent retainer and braces.
Insert one end of the dental floss about five inches into the loop of the threader.pass the floss threader under or over any dental appliance such as braces, permanent retainer or bridge.
How to floss under permanent retainer without threader. Remove the threader from the floss and floss gently back and forth and up and down into the gumline between the teeth. Loop the floss through the floss threader, and tie a knot with the dental floss onto the floss threader. Bring the stiff end of the floss threader between your teeth on the front of your teeth, then pass it beneath the retainer wire on the back side of your teeth.
How to floss a permanent retainer using superfloss. Put a piece of floss through the hole of the threader leaving an end with five or six inches.push the needle piece of the threader in one of the gaps between your bottom teeth.pull the needle through the gap underneath the permanent retainer’s wire.move the floss between your teeth up and down and pull the floss completely through the gap. Once the floss is under the wire, it can be moved up and down the sides of the adjacent teeth to remove plaque.
Repeat this process for each gap that your permanent retainer covers. To remove a threader away of the floss so that someone can floss. If you’re not getting floss under your permanent retainer, nothing is cleaning down there!
Superfloss works similarly to a floss threader, only you don’t need to do the “needle and thread” process. Get the floss threader and a piece of floss. Pull the threader completely through the teeth, until the floss has been passed beneath the wire of the retainer.
Superfloss is essentially a piece of floss with one stiff end. Move the floss between your teeth up and down and pull the floss completely through the gap. Once your floss is under the bar, you will easily be as mysterious as the teeth below you make your regular teeth.
You simply take the stiff end of floss, guide it beneath your retainer, and floss your teeth. The person should pull of at least 12 up to 18 inches of his preferred dental floss. Once the floss has been inserted, the ends can easily be manipulated to clean under bridgework, behind the archwires and beneath the retainer bars.
Pass a piece of regular floss through the threader. Pull the needle through the gap underneath the permanent retainer’s wire. He should insert an end of dental floss, at least for five inches into a loop of a threader.
After the floss is beneath the retainer wire, floss between your teeth normally. These handy devices are little plastic needles that help direct floss between the teeth and under your retainer wire. As with most things, flossing with permanent retainer becomes much easier with practice.
There are three main devices that can be used to floss bonded retainers. Flossing is an important process of cleaning your teeth, and with a permanent retainer, you should not have an excuse for not flossing your teeth. It is easier to clean this retainer since threading the floss around the retainer is an easy exercise.
Here are five basic steps for flossing with just dental floss and a little patience. Simply thread the floss into the eye of the floss threader. Without a floss threader, pushing the floss string into such areas would be difficult.
When you are done, take the floss out and go to the rest of your teeth. If your permanent retainer is just glued to your canines, you can easily thread your floss under a floss threader or fingers under the bar. Slide technique the second option for flossing with permanent retainers is to slide your floss threader in from the front of your teeth so that it reaches through and underneath your permanent retainer.