When you've reached your ideal depth, withdraw the bit, but keep the drill on until it's out of the wall. Be sure not to apply too much pressure so you don’t break your tile.
Tiles are usually made of dense materials, and as mentioned above, some tiles are denser and harder than others.
How to drill into tile wall. Drilling in the masonry wall behind the plaster is a complicated process. Even if the fastener could drill through the glazed surface, the penetrating portion of the metal components would likely crack the wall. An easy, quick fix is to put a strip of masking tape over the area you’re going to drill, according to this old house.
Use an arrowhead tile drill bit (or a pointed masonry drill) and before you attach it to your drill place the point on your mark on the tile and tap the end with a hammer. Once you have made it through the tile and are drilling into the wall, you can then switch to a masonry drill bit. First, put some masking tape on the plaster wall.
This will create a small divot where you will be drilling and help prevent your drill sliding over the tile. Drilling a piece of tile will require some patience. Using a masonry bit sized for your plastic anchors, drill straight through the tile carefully.
Then, use an anchor if you're mounting something in drywall, or insert your screw directly into the wall. Hold the drill to stand perpendicular to the tile. The hammer function will help you get through the wall, however, there is still the risk of cracking if you don’t keep the drill bit straight.
Stop immediately and change the drill bit; Slowly apply pressure as you increase the speed of the drill to drive it into the wall. Glass, porcelain, ceramic, and more all have unique characteristics.
Again, gently, so as to not break the tile. Before you start drilling into the tile, it is essential to know what materials you’re working with on a project. Congratulations, your hole is now complete and no tiles were cracked in the process.
If you rush through the process, it may break or crack your tile. Start drilling with a carbide bit at slow speed till you touch a solid wall. You can screw into a tile by drilling a pilot hole and using an anchor.
Keep going until you get through to the backing board. One way to avoid cracking and scratching the tile as you drill through it to put some sort of buffer between the tile and the drill bit. Drilling into tile requires a masonry bit.even if the fastener could drill through the glazed surface, the penetrating portion of.gently tap the plastic anchor into the hole using a ham mer.
Drilling into tile requires a masonry bit. Gently tap the plastic anchor into the hole using a hammer. Find out how to drill through a tiled wall properly.this video from bunnings warehouse will show you some simple techniques to protect the tiles as you drill.
You can use a steel drill bit or masonry drill bit.